Introduction and working principle of the machine
Powder coating systems are ThinkLink company launched one of the series. The machine manufacturer specialized services in the canning of spray cans weld overlay technique. I learn that the adoption of a number of foreign advanced powder coating covering technology, makes the machine structure, high reliability, easy operation, wide applicability, cost-effective. It uses a lot of import control components, such as Japan SMC pneumatic components, Omron PLC programmable controller and touch control terminals and other components, making the system more stable and reliable.
YGZD-1000A is the use of electrostatic powder coating machine powder coating spray adsorption principle will be adsorbed to the container body weld, subjected to hot melt leveling, BBQ cured to form a layer in the weld plastic protective film (polyester or epoxy) . Electrostatic powder coating, the powder can be uniformly and complete overwrite weld burr on the high and low side, so they can be well protected from the contents of the weld corrosion; Meanwhile, the stability of the cured resin powder excellent protected seam makes various chemical solvents and food for the acid, alkali, high-protein solutions were highly resistant to corrosion, so the powder coating for a variety of different content; and because the machine is designed to use powder after spraying recycling excess powder, again using the principles of the powder utilization, a new generation of technology best choice to protect the weld.
Powder coating machine is three cans production line in an important part of the market, highly praised by domestic and foreign customers, is a good canning equipment. Nanlong Machinery is committed to providing our customers the highest quality canning equipment, develop the best solution.
Machine structure
This machine is functionally divided into:
·Send powder, spray coverage system.
·Powder time recovery, reuse circulatory system.
·Powder multistage, multi-precision filtration system.
·Intelligent automatic filter cleaning system.
·Smart static pressure generation system.
·Circuit control system: PLC control system and contains the human-machine interface operating systems.
·Pneumatic control system.
·Negative balance compensation control system.
Technical parameters
Spray (transmission) speed | 10—100 m/min |
Yield | 50—800 can /min (High standard can H100 mm) |
Can Diameter | Φ63—Φ280 mm (Φ52 To be customized) |
Can Height | 50—300 mm |
Powder type | Polyester (Thermoplastic), epoxy curing powder type (heatset) |
Powder particle volume | 98% Powder particles: 小于90 Micron |
Cover width | 10—14 mm Recommended width:12mm |
Cover thickness | Cold spray Max: 150 microns, thermal spraying Max: 300 microns |
Maximum voltage electrostatic | 100 KV (Adjustable) |
Pink bucket capacity plot | 50 L Working volume:40 L |
Circulatory system | Recovery, filtration, circulation system,Recovery:99.99% |
Filtration system | Multi-level, multi-precision filtering. 1-3 micron filtration |
Compressed Air | 0.5--0.6 Mpa 0.6-0.8 m3/min Relative humidity<40% |
Supply Voltage | Single-phase 220V 50Hz |
Total power | 2.0 Kw(Free air compressor power) |
Host Dimension (L × W × H) | 1200×1100×2300 mm |
Total weight | Approximately 1000 Kg |
Comment loading...
|